FRENCHIE’S TUNNEL CARD

GREETINGS Y’ALL

Once I found FRENCHIE… I was so delighted with her “just do it ” attitude and her accent that I kept going back for more… FRENCHIE’S TUNNEL CARD….is not what I would call a Tunnel card but that’s what she calls it… after you watch the video you will see that she has images , embellishments etc hanging down from the center of opening in the inside of the card…I made one and it does work but frankly I don’t care so much for the hanging part…so my idea is to make to more 3D and attach the images to the inside , outside and the background of the opening… but either way its a fun card and will delight the recipient.

Frenchie’s tunnel card

This is the one she did with the balloons and she didn’t like it so the video is done with butterflies….the balloons don’t hang well due to the fact that they have string on the bottom of them if you used foam tape to adhere one to the inside of the cut out and one to the outside of the cut and then one on the base card itself all those cords would be just fine and it would look just a good I think… same with the butterflies or whatever you may choose to use on your card….

Basically you are going to use a standard 5 ½ x 8 ½ card for the base and if you want to stamp inside  your cut out then you probably do want to use a white or off white base card.  The the pop out part can be designer paper/card stock …not to think or it won’t pop out well and also will be difficult to adhere images/embellishments .

TIP: my first tip is that when you got to put the two pieces together the easiest way to do it is to put the one end as she shows but then IF YOU FOLD the pop out then you can apply the tape and then just fold the card shut and it will line up perfectly… at least that’s my way.

So watch the video and then give it your best shot…Here is my image I did use a sheet of decorator card stock for the inside pop out..and then stamps for the inside base

my version of Frenchie’s tunnel.

inside of my tunnel

You can’t see the head of the bird because it laying almost flat…but when its open then you can see his bird really well.

You may also see that my insert while cut the same size as the base card..I chose not to glue it to outside edges instead I moved it just about a 1/8 of an inch inside….it won’t lay out flat when opened all the way but who does that anyway… all the butterflies are mounted on pop up dots…

Ok try the card either way and AS ALWAYS THANKS FOR STOPPING BY …wire headed cyber toad aka kath

Leave a Reply